0
question_answer1) In braze welding, the tiller metal is
question_answer2) The cutting tool used in the spark erosion machining process is called
question_answer3) Sweep pattern is used for moulding parts having
question_answer4) T-joint weld is used
question_answer5) The number of helical groves which are present in a standard twist drill is usually
question_answer6) The electrodes used in the electro-chemical machining process must be made of
question_answer7) Gray iron is usually welded by
question_answer8) Core prints are used to
question_answer9) The machining process in which the metal of a work piece is dissolved into an electrolyte solution is called
question_answer10) Which of the following machines does not require quick return mechanism
question_answer11) The operation of removing the burr or flash from the forged parts in drop forging is known as
question_answer12) Rotary swaging is used for
question_answer13) V-block is used in the workshop to check
question_answer14) The following flux is used for brazing cast iron
question_answer15) Investment casting is used for
question_answer16) Hot tear refers to
question_answer17) External taper can be accurately measured with the help of
question_answer18) The phenomenon of weld decay occurs in
question_answer19) Coining is the operation of
question_answer20) The purpose of using flux in soldering is to
question_answer21) The metal in machining operation is removed by
question_answer22) Carburising flame is used to weld metals like
question_answer23) Approximate content of Vanadium in H.S.S. cutting tool material is
question_answer24) The melting point 01 the tiller metal in brazing should be above
question_answer25) Chilled surfaces are marked on the pattern by
question_answer26) Arc stability is better with :
question_answer27) The material used for coating the electrode:
question_answer28) In oxy-acetylene welding:
question_answer29) Welding process in which two pieces to be joined are over leaped and placed between two electrodes in known as:
question_answer30) T ? joint weld is used:
question_answer31) Electronic components are often joined by:
question_answer32) Which one of the following is a single point cutting tool?
question_answer33) The lip angle of a single point cutting tool is;
question_answer34) Which of the following among the given options is a single point cutting tool?
question_answer35) Which of the following is not a type of industrial forging?
question_answer36) Which of the following is commonly used die material?
question_answer37) In a drilling machine the metal is removed by:
question_answer38) Which is not the part of drilling machine
question_answer39) On high rate of cooling, austenite converts into:
question_answer40) The crystal structure of austenite is:
question_answer41) Alloy steel as compared carbon steel is more
question_answer42) The raise yield point of low carbon steel
question_answer43) Ability of material to under go large permanent deformations in tension is called
question_answer44) Shock resistance steel should have
question_answer45) Chrome steel is widely used for
question_answer46) Carbon steel castings are
question_answer47) High speed steel should have
question_answer48) Steel containing peariite and ferrite is
question_answer49) Cutting tools are manufactured by
question_answer50) Hardness of Steel depends on
Please Wait you are being redirected....
You need to login to perform this action.You will be redirected in 3 sec
OTP has been sent to your mobile number and is valid for one hour
Your mobile number is verified.