J & K CET Engineering J and K - CET Engineering Solved Paper-2010

  • question_answer
    A message signal of frequency \[5\text{ }kHz\]and peak voltage \[10\text{ }V\]is used to amplify modulate a carrier wave with frequency \[1\text{ }MHz\]and peak voltage 20 V. The side bands produced are

    A)  \[(1000\pm 5)kHz\]  

    B)  \[(1000\pm 7.5)kHz\]

    C)  \[(1000\pm 10)kHz\]

    D)  \[(1000\pm 15)kHz\]

    Correct Answer: A

    Solution :

    Carrier frequency \[{{f}_{c}}\] is many times greater than signal frequency \[{{f}_{m}}\]. Hence, the sideband frequencies are generally close to the carrier frequency. It may be seen that a carrier modulated by a signal is equivalent to 3 simultaneous components the carrier itself and two other sidebands, ie, \[{{f}_{c}}+{{f}_{m}}\] and \[{{f}_{c}}-{{f}_{m}}\].


You need to login to perform this action.
You will be redirected in 3 sec spinner